Language
Current position:Home > PRODUCT > Automatic Transfer Switch >
SGH2-1600G
SGH2 series of PC-class dual-power supply automatic switch (here in after ATSE) is the latest comp any Technology development of hIgh-tech products It is in line with IEC60947-6-1, GB/T14048.11-2002 superscript,And also with "high-rise buildings fire norms" and "Architectural Design fire norms ","emergency Lighting Design Guide, "" civil electrical design specifications. "
Share:
Product details

G type Dual-power Automatic transfer switch

SGH2 series of PC-class dual-power supply automatic switch (here in after ATSE) is the latest comp any Technology development of hIgh-tech products It is in line with IEC60947-6-1, GB/T14048.11-2002 superscript,And also with "high-rise buildings fire norms" and "Architectural Design fire norms ","emergency Lighting Design Guide, "" civil electrical design specifications. "

□ Small in volume, convenient in installation

□ Self-input and self-restoring , Self-input without self-restoring, automatic or manual is all depends on you

□ You can choose integral type or split type

□ 2 Pole ,3 Pole ,4 Pole all you can choose

□ Running parameter could be adjusted

□ Rated voltage of 400V,rated current is from 10Amp to 3200Amp


General

With the development of society. People request to the ability of power supply are becoming more and more strictly. Two sources have been used in many conditions to ensure the reliability of power supply.SGH2 series automatic transfer switch is such a new product designed according t o this requirement. As the products has the function of Self-input and sel f-restoring, Self-input without self- restoring, Utility-utility, utility- generator, it can detect the three phases four wires of utility and the three phase voltage of two sources at the same time. If the primary power is failure, such as over voltage, under voltage or loss phases, it will changeover from the abnormity power to the normal power automatically .The products system in utility-generator, could be sent out a signal. It's perfect capability, reliable ,flexible easy to use, wide range of dual-power products, up to the domestic level.


Application

SGH2 series ATS are mainly used for the state of a load, widely applicable to the fire, postal communication, hospitals, hotels, Urban rail transport and high-rise buildings, industrial assembly line, television stations need electricity for the important parts. Main power Emergency Power can be power grids, with Self excitation generator sets, battery, and so on


Products model and it's meaning

YES1G-Dual.jpg

Performance and Characters

□ Adopt the double row type composite contact,side pull institutions,micro motor prestore and microelectronics control technology,come true zero flashover(no arcing chamber).

□ Reliable electrical and mechanical interlocking chain,the implement of the components indepen dently with islation switch, the use of safe and reliable.

□ Using over zero technolog y,the state of emergency can be enforced under the zero(cut down the 2 ways in the meanwhile) to meet the needs of Fire Fighting .

□ Executive load isolation switch using a single motor-driven, transfer reliable smooth,no no ise,little impact.

□ Operators drive only in the implementation of the electrical load isolation by switching transient current, steady work without providing current,energy-saving significantly.

□ Executive load disconnector chain with a mechanical device used to ensure that reliable standby power of non-interference in each other.

□ Obvious off position indictor,padlocks and other functions,high reliability and serv ice life of more than 8000 times.

□ Mechatronics design,switching conversion accurate,flexible,smoo th and adopt i nternationa l advanced logic control technology,anti-interference capability,without external interference.

□ Cooperation with the main power on and standby power off,or the main power off and standby on, the main power and standby power are both off, three kinds stability working.(I-O-II)

□ Easy installation, the control circuit return way adopt the connect and insert terminal connector.

□ Four operator models:emergency manual operation,electric remote control operation, emergency disconnected operation under the automatic stating, automatic control operat


■ G Type ATS appearance and Installation Dimension

□ Appearance and installation dimension drawing(16A~1600A)ions.

YES1-100G Dual power Automatic Transfer Switch-2


Technical Parameter
YES1G-Dual (1).jpg

Message
  • Name
  • Phone
  • E-mail
  • Address
Message
Hot Product
Automatic Transfer Switch

Phone:

+86-577-61750378

E-mail:

admin@sgmelec.com
admin@hence-electric.com

Fax:

+86-577-61750377

Address:

No.29, Tushanba Road, Qianjiang Economic Development Area,Yuhang, Hangzhou, China